Hyundai Ioniq vFL
Hyundai Ioniq Electric (28 kWh)
Vehicle Type: HIONVFL
Log tag:
v-hyundaivfl
Namespace:
xhi
Maintainers: Michael Balzer
Sponsors: Henri Bachmann, Tóth Lajos
Support Overview
Function |
Support Status |
---|---|
Hardware |
OVMS v3 (or later) |
Vehicle Cable |
OBD-II to DB9 Data Cable for OVMS (1441200 right, or 1139300 left) |
GSM Antenna |
1000500 Open Vehicles OVMS GSM Antenna (or any compatible antenna) |
GPS Antenna |
1020200 Universal GPS Antenna (SMA Connector) (or any compatible antenna) |
SOC Display |
Yes |
Range Display |
Yes |
GPS Location |
Yes (from modem module GPS) |
Speed Display |
Yes |
Temperature Display |
Partial |
BMS v+t Display |
Yes |
SOH Display |
Yes |
TPMS Display |
Yes |
Charge Status Display |
Yes |
Charge Interruption Alerts |
Yes |
Charge Control |
No |
Cabin Pre-heat/cool Control |
No |
Lock/Unlock Vehicle |
No |
Valet Mode Control |
No |
Others |
Charge time estimation |
Custom Metrics
Metric name |
Example value |
Description |
---|---|---|
xhi.b.range.user |
134.56km |
Current maximum user range |
xhi.b.soc.bms |
78.5% |
Internal BMS SOC |
xhi.c.state |
128 |
Charge state flags |
xhi.e.state |
13 |
General/ignition state flags |
Custom Configs
Config name |
Default value |
…unit |
Description |
---|---|---|---|
xhi ctp.maxpower |
0 |
kW |
Default charge power limit for charge time estimations, 0 = unlimited |
xhi ctp.soclimit [1] |
80 |
% |
SOC level for secondary charge time estimation |
xhi notify.charge.delay.ccs |
15 |
Seconds |
Wait time for DC charge power to ramp up before sending the notification |
xhi notify.charge.delay.type2 |
3 |
Seconds |
… same for AC charging |
xhi range.ideal |
200 |
km |
Ideal range of new battery |
xhi range.user |
200 |
km |
Typical maximum user range (updated automatically) |
xhi range.smoothing |
10 |
Number of SOC samples, 10=~5% SOC, 0=disable |
|
xhi tpms.pressure.warn |
230 |
kPa |
Tyre warning at/below this pressure |
xhi tpms.pressure.alert |
220 |
kPa |
Tyre alert at/below this pressure |
xhi tpms.temp.warn |
90 |
°C |
Tyre warning at/above this temperature |
xhi tpms.temp.alert |
100 |
°C |
Tyre alert at/above this temperature |
The web UI features a configuration page for this in the vehicle menu.
Debug Logs
To see debug messages in your log, component v-hyundaivfl
to log level debug
. You can do so
dynamically (log level debug v-hyundaivfl
) or persistent by the logging configuration.
To see all PID poll results in your log, set log level verbose
for component v-hyundaivfl
.
It’s recommended to accompany this by setting log level debug
for events
.